2500 CFM Air Dryer & Cooler - ADCS-2500 With MT-3


Provides a cool, clean, and dry air supply up to 2500 CFM at 150 PSI.

Moisture in compressed air can clog blast pots, and decreases the quality of the blasted substrate by putting moisture back on the surface.

This heavy duty moisture and oil separator cools, cleans, and dries the discharged air.

With two stage filtration, cyclone separation, and residual filtration, the moisture trap is exceptionally efficient while assuring minimal pressure drop.

The ADCS-2500 is most frequently used with the DB1500 and DB3000.


  • Cools, cleans, and dries air up to 2500CFM at 150 PSI
  • Air is cooled within 4° of ambient temp
  • Air is oil and moisture free
  • Skid mounted for easy transportation
  • Can be powered by any 12V, minimum 6 amp power source
  • All purchases come with full factory support


  • Dimensions: 48" L x 34" W x 51" H
  • Weight: 446 lb
  • Fan Power Consumption: 12V and 6 amps/hour (each)
  • 2500 CFM Capable Water Trap
  • Moisture Separator
  • 1 1/4" Air Inlet and Discharge
  • 0–300 PSI gauge
  • 1 1/4” Shut off valve
  • 1/4” Moisture Drain
  • 10’ Battery Cables
  • Does not include compressor air hose. Purchase here.

Learn more about the ADCS-2500

ADCS-2500 Spec Sheet



Online freight options are available for contiguous US only. All other orders will be contacted after purchase to discuss available shipping options.



Please notify your bank if you plan on any purchases over $2,000. Most banks will not allow large purchases without notification beforehand. If you are experiencing an error during checkout, please contact our office to complete your order.  



Run more efficiently! Check out the ADCS Twin Blast Adapter today!

For best practice, we recommend running your Air Dryer & Cooler with two 25' air hoses with a 1 1/4" ID.

Click below to order one today!


We Also Recommend