Dustless Blasting® Rust Inhibitor 5 Gallon Bucket
Shipping Notice: Purchases of three (3) or more 5 gallon pails of Rust Inhibitor will be shipped via freight. You will be given freight options at checkout.
Please notify your bank if you plan on any purchases over $2,000. Most banks will not allow large purchases without notification beforehand. If you are experiencing an error during checkout, please contact our office to complete your order.
This rust inhibitor is specially formulated for the Dustless Blasting® process and for our machines, preventing flash rust for up to 72 hours. Similar to HoldTight, using this product will improve coating adhesion and enhance paint performance all while being non-toxic, biodegradable and non-hazardous. When used correctly by following 4 easy steps, a perfect paint ready surface can be achieved.
Step 1) Blast with Rust Inhibitor Treated Water
Blasting with rust inhibitor in the water cleans the metal while preventing it from being embedded with chlorides.
Step 2) Rinse with Rust Inhibitor Treated Water
After blasting, the metal still needs a final rinse. Using the Inhibitor and water at a 1.3 oz per gallon ratio will work perfect.
Step 3) Remove Standing Water from the Metal
Allowing the metal to dry completely is important. Using something like a leaf blower can quickly remove any standing water from the metal.
Step 4) Avoid Re-Contamination
Dirt, body oil and moisture all cause rust. Be sure to wear clean rubber gloves when handling the metal and keep away from causes of additional moisture (like morning dew) if left out overnight.
There you have it, flash rusting doesn't have to occur when Dustless Blasting. Remember Rust Inhibitor won't prevent rust from ever occurring, it just gives you up to 72 hours to be ready to prime and paint.
Click here for the Rust Inhibitor MSDS (Safety Data Sheet).
Have a bigger job? Need more Rust Inhibitor? Click here to buy a 55 gallon drum instead!